استدعاء الممرضات التقليدي
لوحة استدعاء طوارئ رئيسية 10- خط NC812KE
زر استدعاء والغاء NC802DB
- A range of 10 to 30 Zone Emergency Indicator Panels c/w 12V 400mA PSUs.
- Fully compatible with C-TEC’s entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
- 10, 20 or 30 zonal alarm LEDs (dependent on model purchased, see below for parts listing).
- Optional mute button.
- 2 volt-free relay contacts.
- Surface mounting.
- Connections for optional Repeater panels and sounders to increase call indication levels.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB andstandard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
زر استدعاء والغاء للطوارئ NC802DEB
كوردة – 6 قدم NC805C/6
- An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 andStandard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
كوردة – 14 قدم NC805C/14
شداد للاستدعاء من الحمام NC807C
- A long 4.2m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 4.2m (14ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Ceiling or wall mountable.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
لمبة بيان NC806C
لمبة البيان بسارينة NC806CS
- Provides visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant red light and Emergency calls via a pulsing red light.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Can also used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Fnished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Overdoor Lights c/w Sounders and Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.