استدعاء الممرضات المعنون

لوحة استدعاء رئيسية QT601

وحدة توزيع QT603

  • Supplies power to and controls a Quantec Addressable Call System.
  • Monitors all network devices and manages the routing and distribution of all calls.
  • Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
  • Includes a library of 40 pre-set & 45 custom place names.
  • System setup requires a laptop PC running Quantec’s QT707 programming tools.
  • Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
  • System wiring requires one or more QT603 network splitters.
  • Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs).
  • An essential wiring/installation aid for C-TEC’s Quantec Addressable Call System.
  • Helps protect against open and short circuit faults and reduces the risk of volt drop.
  • Includes one input and one output connection for Quantec’s ‘Spine’ wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec’s field devices (typically 4 core stranded security cable).
  • At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
  • Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
  • Mounts on a standard 25mm UK double gang back box.
  • ‘Power’ and ‘Fault’ indicators.
  • 60 addressable devices per QT603. 

شاشة لبيان الاستدعاء QT608C

زر استدعاء والغاء QT602

  • A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc.
  • Includes an onboard sounder and buttons to accept, scroll through and manually divert calls. 
  • Shows call type, call location and (depending on the device used to make the call) the User ID or name of the person calling.
  • Highest priority calls are shown first with a message saying how many calls are waiting.
  • Flash and sounder rates intensify to reflect the urgency of incoming calls. 
  • Adjustable contrast and volume controls.

External sounder connection.

  • A programmable addressable call point c/w remote jack socket for use with C-TEC’s Quantec Addressable Call System.
  • Includes a Call button, Reset button and red/green confidence light.
  • Can make up to 5 levels of call – Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.
  • Remote socket allows the connection of optional tail call leads, pressure mats, etc.
  • Can be programmed to operate in a multitude of ways using a QT423 configurator.
  • Connections provided for additional slave devices such as ceiling pulls, overdoor lights, slave infrared receivers and more.

QT602M magnetic reset version also available

كوردة – 6 قدم NC805C/6

كوردة – 14 قدم NC805C/14

  • A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
  • Allows users to remotely generate Standard calls from armchairs, beds, etc.
  • Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
  • Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
  • Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.

 

  • A long 4.2m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
  • Allows users to remotely generate Standard calls from armchairs, beds, etc.
  • Comprises a pear-shaped call push, 4.2m (14ft) trailing lead and a 6.35mm remote jack plug.
  • Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
  • Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.

شداد للاستدعاء من الحمام QT607

لمبة بيان المعنونة - QT606A

  • Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Typically wired as a slave to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point. Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm. Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
  • Key Features:
  • Surface mountable.
  • Base fits 16mm conduit and BESA centres.
  • Also available as part of the QT951 Accessible Toilet Expansion Kit.
  • An addressable overdoor light & sounder designed to increase call indication levels in large Quantec sites. 
  • Can be programmed to illuminate and sound when certain groups of call points are calling.
  • Ideal for providing area indication or ‘follow me’ lights at the ends of corridors, etc 
  • Flash and sounder rates change/intensify to reflect the urgency of incoming calls.
  • Adjustable volume control.
  • Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
  • Mounts on a standard UK 25mm single gang flush or surface back box.
  • Finished in tough, durable ABS plastic.

يمكنك طلب اي منتج من خلال مراسلتنا عبر زر الواتس اب الموجود اسفل يسار الصفحة